Abstract
The rapid increase in global atmospheric temperature has raised serious concerns about heat exposure among outdoor workers, increasing the risk of sunburn and thermal discomfort. This study focuses on the development of thermos-regulative textile coatings using AC electrospinning to enhance worker’s safety and comfort. Eletrospun fiber mats were fabricated using a 1:1 blend of polyvinylpyrrolidone (PVP) and hydroxypropyl cellulose (HPC) dissolved in ethanol. Silica was incorporated as the primary additive, and boron nitride nanoparticles were added at various concentrations (6%, 12%, 18%) to evaluate their influence on thermal performance. Optimized AC electrospinning parameters enabled the production of continuous, bead free fiber mats. SEM analysis showed moderate uniform fiber morphology with an average fiber diameter of approximately 1 m. Thermal characterization revealed that silica-based coatings exhibited higher specific heat capacity and lower thermal conductivity. The incorporation of boron nitride nanoparticles resulted in a reduction in both specific heat capacity and thermal conductivity as the concentration increased. FTIR analysis confirmed the presence of characteristic functional groups, including Si-O-Si and BN related peaks, verifying successful additives incorporation. The developed electrospun coatings demonstrate promising potential for thermos-regulative textile applications designed to improve thermal protection and personal comfort under elevated temperature conditions.
Recommended Citation
Samuel, Tom and Thomas, Vinoy
(2026)
"Thermo-Regulative Textile Coating by AC Electrospinning,"
Journal of the Alabama Academy of Sciences: Vol. 97:
No.
1, Article 138.
Available at:
https://jagworks.southalabama.edu/jaas/vol97/iss1/138
