Abstract
Recycled high-density polyethylene (rHDPE) is widely used in consumer and industrial applications; however, its resistance to biodegradation limits its environmental sustainability. This study investigates the incorporation of hemp hurd as a natural, bio-based filler to enhance the biodegradability of rHDPE while maintaining processability. Recycled HDPE obtained from KW Plastics was blended with hemp hurd at loadings ranging from 5 to 60 wt% using both a batch mixer (Brabender Plasticorder) and a continuous twin-screw extruder (Process 11). The effects of filler content and processing method on the processability, dispersion, and material integrity of composites were evaluated. Increasing hemp-hurd content promoted the introduction of biodegradable pathways and reduced the overall polymer content, while maintaining melt processing feasibility across a wide composition range. The use of twin-screw extrusion improved filler dispersion compared to batch mixing at higher loadings. These results demonstrate that hemp-hurd reinforced rHDPE composites offer a promising route toward more sustainable, partially biodegradable plastic materials.
Recommended Citation
Jensen, Alexander Lawrence
(2026)
"Enhancing the Biodegradability of Recycled High- Density Polyethylene via Hemp-Hurd Reinforced Composites,"
Journal of the Alabama Academy of Sciences: Vol. 97:
No.
1, Article 92.
Available at:
https://jagworks.southalabama.edu/jaas/vol97/iss1/92
